BeadSmith Metal Hole Punch Pliers For Sheet Metal - 1.5mm
The Beadsmith Metal Hole Punch Pliers With Gauge Guard 1.5mm Round Hole Punches Sheet Stock Up To 20 Gauge Thick!. These pliers punch a 1.5mm hole in metal sheet stock up to 20 gauge. They create a smooth, clean hole without barbs or rough edges. Plus, with the gauge guard, the area around the hole will be free of unsightly indentations! Instructions for using the gauge guard: Hold the pliers shut. When properly adjusted, there should be enough space to insert your metal piece between the widest part of the pin and the bottom jaw of the pliers with a little extra room left over. If the metal doesn't fit or if there's no extra space, simply expand the jaw opening a little farther by turning the gauge guard screw to the right. (Turn right for heavier gauges and left for lighter gauges.) Measurements: 6 long and 2.25 wide at the handle. The hole punch is 1.5mm in diameter and will go through 20 gauge wire or thinner. Includes one bonus replacement pin. Quantity: 1 BeadSmith 1.5mm metal hole punch plier
EUROTOOL 1.25MM ROUND HOLE PUNCH PLIERS FOR SHEETMETAL
Eurotool EuroPunch Pliers. For Use With Stampings And Sheet Metal. Creates Round 1.25mm Diameter Holes. EuroPunch Pliers developed by EUROTOOL. These newly designed hole punch pliers will punch copper or silver as thick as 18 gauge. Exactly what you need to easily add a hole to that stamping, metal blank or sheet stock. Will create a clean 1.25mm hole without rough edges or burs in sheet metal stock. The pliers have ergonomic handles and are made of thick carbon steel. One (1) replacement pin included. When worn, the pin can easily be changed for a clean cut every time. Measurements: Pliers are 5 1/4 Long. Punch pin is 1.25mm in diameter and will create 1.25mm round holes. PLEASE NOTE: We highly recommend eye protection with the use of any tools. These pliers are intended for beading and other fine hobby work. Not recommended for heavy duty applications such as automotive, home improvement, or maritime use.
Beadsmith Replacement Pins For 1.8mm Metal Hole Punch Plier (2 Pack)
Beadsmith Replacement Pins For 1.8mm Metal Hole Punch Pliers 2-pack. These replacement pins are sized for the BeadSmith's 1.8mm Metal Hole Punch Pliers (XTL-0069). TO REPLACE PIN: 1) Remove both nuts at the tip by turning them counter-clockwise. Use chain or flat nose pliers if needed to loosen nuts. 2) Remove the old pin and insert the new. 3) Replace the nuts, turning clockwise to fasten pin. Quantity: 2 Pins and 4 Nuts
Base Elements Square Dangle Earring Bases 1 Pair/Pkg-Silver Overlay 12.7mm
AMATE STUDIOS-Base Elements. These are the perfect base for a vast variety of multi-media designer wear from jewelry to charms for scrapbooking; garments and much more. These bases are all individually handmade and will vary slightly from one piece to another. The silver plated bases are a great for use with resins; UTEE polymer clay; paper; fabric; beads and the list is virtually endless. Available in a wide variety of shapes and sizes or pendants; earrings; bracelet's and adjustable rings these pieces are all lead free. This package contains two 9/16in square earring bases. Imported.